The quick start guide provides an overview of the basic installation steps for a B Series panel. More detailed installation instructions can be found in the Control Panel Installation and System Reference Guide as well as the individual module installation manuals found on the Bosch Website.

Quick Start Guide

Installation and System Reference Guide

Additional instructions including video tutorials and more detailed installation guides are included in the sections below.

Mount enclosure


Install panel


Install communication module


Wire panel for devices keypad receiver and power


Install Keypads


RADION Wireless

RADION UNIVERSAL WIRELESS TRANSMITTER


RADION WIRELESS DOOR/WINDOW CONTACT


RADION PIR WIRELESS MOTION DETECTOR


B810 RADION receiver SD


Expansion Modules

Input Expansion

Wired

The B208 Octo-input Module is an 8 point supervised expansion device that connects to control panels through the SDI2 bus. This module communicates back to the control panel all point status changes. The inputs are accessed through on-board screw terminal connections.

Installation Manual

RADION Wireless

The Radion reference guide contains the basic information to install the RADION system. Installation videos for each device can be found in RADION Wireless section above.

Radion reference guide

Output Expansion

The B308 Octo-output Module is a supervised device that provides 8 programmable outputs (Form C relays) and connects to control panels through the SDI2 bus. Each output provides dry contact switching rated for a maximum of 1.0 A at 24 VDC. The outputs are accessed through on-board screw terminal connections. The address switches are used to set the module’s SDI2 address. Control panel programming determines each output’s response to specific events.

Installation Manual